manualshive.com logo in svg

Panasonic KX-TG2583, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TG2583 Скачать руководство пользователя страница 56

56

Automatic Answering Operation

When the unit answers a call, a greeting message is played and the
caller’s message is recorded. While recording, “

- Answering -

” will

flash on the base unit display.

•

The total recording time (including greeting message) is 

about

15 minutes

. If messages are recorded in noisy rooms, the time may

be shortened by up to 3 minutes.

•

A maximum of 64 messages (including greeting message) can be
recorded.

Setting the Unit to Answer Calls

Press 

(ANSWER!ON)

to turn on the answering 

system.

•

The indicator lights and “

Answer set

” is

heard.

•

The unit will announce the remaining
recording time if it is less than 5
minutes. 

•

If you hear “

Memory full

”, “

Message

full

” is displayed on the base unit

and the ANSWER ON indicator
flashes rapidly, erase some, or all, of
the messages (p. 59).

•

If you do not want the unit to answer calls, press 

(ANSWER!ON)

again to turn off

the answering system. The indicator light goes out and “

Answer off

” is heard.

•

You can also turn on the answering system remotely using any other phone
(p. 65).

Monitoring incoming calls

While a call is being recorded, you can monitor it through the base unit
speaker. 
To answer the call with the base unit, press 

(DIGITAL!SP-PHONE)

. For the

handset, press 

(TALK)

. The unit stops recording.

If the call monitoring feature is not required, turn it off by pressing and
holding 

(STOP/EXIT)

in the standby mode. Each time you press and hold

(STOP/EXIT)

in the standby mode, the feature will turn on or off.

While a call is being recorded, you can turn the feature ON by pressing 

Ö

or 

Ñ

.

(STOP/EXIT)

(ANSWERÒON)

    

,       

ANSWER ON 
Indicator

Содержание KX-TG2583





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды