49
Useful Information
Problem
You cannot program items,
such as the LCD contrast.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the
program/search.
The unit does not display the
caller’s name and/or phone
number.
Cause & Remedy
•
Programming is not possible while the
unit is in the talk mode or when viewing
the Caller List/directory list.
•
Do not pause for over 60 seconds while
programming.
•
Move closer to the base unit.
•
Ö
,
Ñ
,
BACK
Ü
or
FWD/EDIT
á
may
have been pressed when you picked up
the handset. Press
(FUNCTION/EXIT/CH)
and try again.
•
If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
•
You cannot store an item in the directory
while the unit is in the talk mode.
•
Do not pause for over 60 seconds while
storing.
•
To answer the call, press
(TALK)
. Start
again from the beginning after hanging
up.
•
You need to subscribe to a Caller ID
service.
•
Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
•
Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
•
Telephone line noise may be affecting
the Caller ID information.
•
Some of PBX units may not support
Caller ID. Please consult with your PBX
supplier.
•
The calling party does not subscribe to
Caller ID services.
