manualshive.com logo in svg

Panasonic KX-TG2481B, Руководство по эксплуатации, Страница: 26 / 80

Поделиться
Скачать
Panasonic KX-TG2481B Скачать руководство пользователя страница 26

26

Preparing the Answering System

•

In step 7, you cannot enter numbers greater than 12. 

Do not use military time.

(To set 13:00 hours, enter “0100”, and select “PM” by pressing 

(*)

.)

If a power failure occurs, “

” will flash on the base unit display and

synthesized voice may announce the incorrect time/day. Readjust the
day/time.

For Caller ID service users 

(p. 32)

•

The Caller ID information will re-set the clock after the first ring if the adjusted
time is incorrect. However, the day will not be re-set. Set the day following the
procedures on pages 25.

•

If the time has not previously been set, the Caller ID information will not adjust
the clock.

•

The Caller ID information will automatically adjust the clock for daylight saving
time.

To check the time/day

Repeat steps 1 to 6 on page 25.

•

The current time/day is heard. When finished, press 

(FUNCTION/EXIT/CH)

.

Содержание KX-TG2481B

















































































Отзывы:

Нет отзывов