67
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Problem
The unit does not display
the caller’s name and/or
phone number.
The handset display exits
the Caller List.
You cannot page the
handset or base unit.
You cannot redial by
pressing
(PAUSE/REDIAL)
on the handset
.
You cannot have a
conversation or listening to
messages using the
headset.
Cause & Remedy
•
You need to subscribe to a Caller ID service.
•
Other telephone equipment may be interfering
with your phone. Disconnect it and try again.
•
Other electrical appliances connected to the
same outlet may be interfering with the Caller
ID information.
•
Telephone line noise may be affecting the
Caller ID information.
•
The caller requested not to send his/her
information. See page 30.
•
If a call is being transferred to you, the caller
information will not be displayed.
•
Do not pause for over 60 seconds while
searching.
•
The called handset is too far from the base
unit.
•
The called unit is in use. Try again later.
•
If more than one other user is using the
handsets and base unit, you may not be able
to page. Try again later.
•
While 2 other handsets are making a
conference call, you cannot page the
handset or the base unit. Try again later.
•
If the last number dialed was more than
32 digits long, the number will not be redialed
correctly.
•
The button has a double function as either
redial or pause. It will redial the last number
dialed if pressed at the outset of a call
(p. 27). If another number has been dialed
first, it will operate as a pause button (p. 47).
•
Make sure that an optional headset is
connected properly (p. 12).
•
If “
SP-phone
” is displayed on the handset,
press
to switch to the headset.
