Panasonic KX-TG2355 Скачать руководство пользователя страница 69

Страница: 69 / 84

Usef

ul Inform

ation

For assistance, please call: 1-800-211-PANA(7262)

Troubleshooting

If the handset display shows error messages, see “If the Following Appear on
Your Display...” (p. 68) for the Cause & Remedy.

Telephone System

Problem

Cause & Remedy

“

No link to base. Move

closer to base, try
again.

” is displayed and an

alarm tone sounds.

• You are too far from the base unit. Walk

closer to the base unit.

• Confirm the base unit’s AC adaptor is

plugged in.

• Raise the base unit antenna.
• If the above remedies do not solve the

problem, the handset may have lost
communication with the base unit. Register
the handset again (p. 51).

Static, sound cuts in/out,
fades. Interference from other
electrical units.

• Move the handset and base unit away from

other electrical appliances (p. 3).

• Walk closer to the base unit.
• Raise the base unit antenna.

The handset and/or base unit
does not ring.

• The ringer volume is turned off. Set to high,

medium, or low (p. 17, 18).

The handset display is blank.

• If the handset display is blank, fully charge

the battery (p. 10).

You cannot program any
function items.

• Programming is not possible while the

handset and/or base unit is being used.

• Do not pause for over 60 seconds while

programming.

• Walk closer to the base unit.
• While another user is listening to messages

or the Answering System is handling a call,
you cannot program. Try again later.

While programming or
searching, the handset starts
to ring and the program/
search stops.

• A call is coming in. To answer the call, press

[

]

[

]

[SP-PHONE]

. Start again from

the beginning after hanging up.

You cannot make an intercom/
outside call.

• Your handset is in remote operation mode

(p. 55). Exit by pressing

[OFF]

• The handset you called is too far from the

base unit.

• If the handset or base unit is in use, you may

not be able to make a call. Try again later.

PQQX14027YA.book 69 ページ２００４年２月４日　水曜日　午後１時３５分

Содержание KX-TG2355





















































































Результаты поиска

Содержание KX-TG2355

Отзывы:

Panasonic KX-TG2355, Руководство по эксплуатации, Страница: 69 / 84

Результаты поиска

Содержание KX-TG2355

Отзывы: