Panasonic KX-TG2346 Скачать руководство пользователя страница 67

Страница: 67 / 84

For assistance, please call: 1-800-211-PANA(7262)

Troubleshooting

Usef

ul Inform

ation

Answering System

The Ringer/Message Alert
indicator flashes slowly when
the handset is not ringing and
in use.

• The Message Alert is turned on and new

messages have been recorded. Turn the
Message Alert off (p. 24) or listen to the new
messages (p. 50, 51, 55).

You cannot have a
conversation using the
headset.

• Make sure the optional headset is connected

properly (p. 61).

• If “

SP-phone

” is displayed on the handset,

press

[

]

to switch to the headset.

Problem

Cause & Remedy

The Answering System is on,
but incoming messages are
not recorded.

• The recording time is set to “Greeting only”.

Select “1 minute”, “2 minutes” or “3 minutes”
(p. 22).

• Memory is full. Erase unnecessary messages

(p. 53).

“

” flashes and the

ANSWER ON indicator
flashes rapidly. No new
messages are recorded.

• Memory is full. Erase unnecessary messages

(p. 53).

You cannot operate the
Answering System from the
base unit or the handset.

• If another user is in use, you may not be able

to operate the Answering System. Try again
later.

• If another user is listening to messages or the

Answering System is handling a call, you
cannot operate the Answering System. Try
again later.

You cannot operate the
Answering System from a
touch tone phone.

• Make sure you entered the correct remote

code (p. 56).

• The Answering System may not respond if

the tones are too short to activate the unit.
Press each button firmly.

• The Answering System is off. Turn it on

(p. 58).

You cannot erase messages.

• While another user is operating the

Answering System or a caller is leaving a
message, you cannot erase messages.

Problem

Cause & Remedy

FULL

PQQX13987YA.book 67 ページ２００４年２月５日　木曜日　午前９時３分

Содержание KX-TG2346





















































































Результаты поиска

Содержание KX-TG2346

Отзывы:

Похожие инструкции для KX-TG2346

Бренды по названию

Популярные бренды

Panasonic KX-TG2346, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2346

Отзывы:

Похожие инструкции для KX-TG2346

Бренды по названию

Популярные бренды