Panasonic KX-TG2335S Скачать руководство пользователя страница 58

Страница: 58 / 68

Troubleshooting

“

Recharge battery

” is

displayed, “

” flashes, or

the handset beeps
intermittently.

• Fully charge the battery (p. 9).

“

Charge for 6h

” and “

”

are displayed and the handset
does not work.

• The battery has been discharged. Fully

charge the battery (p. 9).

• Check battery installation (p. 9).

You charged the battery fully,
but “

Recharge battery

” is

still displayed and/or “

”

continues to flash, or “

Charge

for 6h

” and “

” are

displayed.

• Clean the charge contacts and charge again

(p. 10).

• The battery may need to be replaced. If you

install a new battery, fully charge it (p. 9).

The CHARGE indicator does
not go out after the battery has
been charged.

• This is normal.

The Ringer/Message Alert
indicator flashes slowly when
the handset is not ringing and
in use.

• The Message Alert is turned on and new

messages in your voice mailbox have been
recorded. Turn the Message Alert off (p. 18)
or listen to the new messages (p. 44, 45).

You cannot have a
conversation using the
headset.

• Make sure the optional headset is connected

properly (p. 52).

• If “

SP-phone

” is displayed on the handset,

press

[

]

to switch to the headset.

If you cannot solve your
problem

• Visit our website:

http://www.panasonic.com/support

• Contact us via the web at:

http://www.panasonic.com/contactinfo

• Call our customer call center at:

1-800-211-PANA(7262)

Problem

Cause & Remedy

PQQX13985YA.book 58 ページ２００４年１月２２日　木曜日　午後５時８分

Содержание KX-TG2335S





































































Результаты поиска

Содержание KX-TG2335S

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-TG2335S, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2335S

Отзывы:

Бренды по названию

Популярные бренды