Making Calls
Cor
dless T
elephone
For assistance, please call: 1-800-211-PANA(7262)
23
To dial after confirming the
entered number
If noise interferes with the
conversation
Have the unit select a clearer
channel by doing one of the
following:
Press
[
]
(Channel) if talking
using
[
]
,
press
[
]
(Channel) if talking
using
[
]
, or
press
CH
, which is displayed when
you adjust receiver or speaker
volume (p. 24).
OR
Walk closer to the base unit.
To redial the last number
dialed
To redial using the redial
list (Memory Redial)
The last 5 phone numbers dialed with
the handset are stored in the redial list.
•
To erase an item,
scroll to the
desired item then press
Erase
.
• If “
No items stored
” is displayed,
the list is empty.
To put a call on hold
To return to the call,
press
[
]
or
[
]
.
• If another phone is connected on the
same line, you can also return to the
call by lifting its handset.
• If a call is kept holding for 6 minutes,
an alarm tone will start to sound. After
4 additional minutes on hold, the call
will be disconnected.
• The alarm volume corresponds to the
ringer volume level (p. 17). If the
ringer is OFF, the alarm will sound at
the LOW level.
1
Enter a phone number.
• If you misdial, press
Clear
. Enter
the correct number.
• If a pause is required for dialing,
press
Pause
where needed
(p. 38).
• To cancel, press
[OFF]
.
2
Press
[
]
or
[
]
.
3
To hang up, press
[OFF]
or
place the handset on the base
unit.
Press
[
]
or
[
]
, then press
[REDIAL]
.
3334444
Clear Pause
1
Press
[REDIAL]
.
• The last number dialed is
displayed.
2
Scroll to the desired number by
pressing
[ ]
or
[ ]
.
• You can also scroll through the list
by pressing
[REDIAL]
.
• To exit the list, press
[OFF]
or
Exit
.
3
Press
[
]
or
[
]
.
Press
Hold
during a conversation.
• “
Hold
” is displayed.
• To page the base unit while holding,
press
Intercom
(Intercom hold).
333-4444
Exit
Erase
>
>
>
>
Talk
00-00-08
(VE)
Hold
