background image

Answering System Features

25

Answering system

The answering system can answer and 
record calls for you when you are 
unavailable to answer the phone.

Important:

L

Only 1 person can access the 
answering system (listen to 
messages, record a greeting 
message, etc.) at a time.

L

When callers leave messages, the 
unit records the date and time of each 
message. Make sure the date and 
time have been set (page 14).

Memory capacity

The total recording capacity (including 
your greeting message and caller 
messages) is about 20 minutes. A 
maximum of 64 messages can be 
recorded.

Note:

L

If message memory becomes full:

Answer Sys. Full

 is shown 

on the handset display

{

6

}

 on the base unit flashes rapidly

Turning the answering 
system on/off

Using the base unit

Press 

{

s

}

 to turn on/off the answering 

system.

L

When the answering system is turned 
on, the answer on indicator lights up.

Using the handset
1

{j

/OK

}

2

{^}

/

{V}

Answer System

 

i

 

{

>

}

3

{^}

/

{V}

Answer On

 or 

Answer Off

 

i

 

{

>

}

 

i

 

{ih}

Note:

L

When the answering system is turned 
on, 

u

 is displayed.

Greeting message

When the unit answers a call, callers are 
greeted by a greeting message.

Recording a greeting 
message

You can record your own greeting 
message (2 minutes and 30 seconds 
max.).

1

{j

/OK

}

2

{^}

/

{V}

Answer System

 

i

 

{

>

}

3

{^}

/

{V}

Record Greeting

 

i

 

{

>

}

L

Hold the handset about 20 cm 
away and speak clearly into the 
microphone.

4

Press 

{j

/OK

}

 to stop recording.

5

{ih}

Using a pre-recorded greeting 
message

If you erase or do not record your own 
greeting message, the unit plays a pre-
recorded greeting message for callers 
and asks them to leave messages. If the 
message recording time (page 30) is set 
to 

Greeting Only

, caller messages 

will not be recorded and the unit will play 
a different pre-recorded greeting 
message asking callers to call again.

TG1855-1857AL(e-e).book  Page 25  Thursday, July 12, 2007  5:31 PM

Содержание KX-TG1855













































Отзывы: