Preparation
12
Note:
L
When replacing batteries, remove the
old batteries.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
When charging,
“
Charging
”
will be
displayed.
When the batteries are fully charged,
“
Charge Completed
”
will be
displayed.
*1 The pictured model is KX-TG1851.
*2 KX-TG1852/KX-TG1853
Note:
L
It is normal for the handset to feel
warm during charging.
L
If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L
Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
Note:
L
It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L
Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L
Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L
The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Base unit
*1
Charger
*2
Battery icon
Battery level
5
High
6
Medium
7
Low
L
When flashing:
Needs to be
charged.
Operation
Operating
time
In continuous use
17 hours max.
In continuous
standby mode
180 hours
max.