Panasonic KX-TG1711BX, Руководство по эксплуатации

Страница: 19 / 64

*2 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
” . To turn this feature off, select “
Manual
” .
(Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*4 When this feature is set to off, the handset number is displayed.
*5 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys.
*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*7 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*8 Although the handset displays these items, these features are not available for this model.
*9 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). Alarm can be programmed
for each handset. You can set one of 2
different alarm options (once or daily).
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
1
M N#720
2
MbN : Select the desired alarm option. a
M N
“
Off
”
Turns alarm off. Go to step 7.
“
Once
”
An alarm sounds once at the set time.
“
Daily
”
An alarm sounds daily at the set time.
Go to step 4.
3
Enter the desired date and month. a
M N
4
Set the desired time. a M N
5
MbN : Select the desired alarm tone. a
M N
R We recommend selecting a different
ringer tone from the one used for
outside calls.
6
MbN : Select the desired snooze setting.
a M N
7
M N a MeN
Note:
R Press MeN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key from 0 to 9 , * , or #
to stop the sound but keep set time and/or
the snooze function activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
19
Programming
KX-TG1711BXUE_eng_0223_ver001.pdf 19 2/23/2023 10:44:58 AM