6
How long is the battery operating
time?
L
When you are using fully-charged Ni-MH batteries (supplied
batteries);
In continuous use: 15 hours max.
Not in use (standby): 170 hours max.
L
It is normal for batteries not to reach full capacity at the initial
charge. Maximum battery performance is reached after a few
complete cycles of charge/discharge (use).
L
Actual battery performance depends on usage and ambient
environment.
Can I keep the handset on the base
unit or charger when I am not using
it?
L
Even after the batteries are fully charged, the handset can be
left on the base unit or charger without any ill effect on the
batteries.
When should I replace the batteries?
L
If the batteries are fully charged until
5
is displayed, but
7
is displayed after a few calls, replace the batteries with
new ones.
What is a PIN?
L
The PIN is a 4-digit number that must be entered in order to
change certain base unit settings. The default PIN is
“
0000
”
.
What should I do to display caller
information?
L
You must subscribe to a Caller ID service. Contact your service
provider/telephone company for details.
What should I do when noise is
heard, sound cuts in and out?
L
You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
L
Unplug the base unit’s AC adaptor to reset the unit and turn off
the handset. Reconnect the adaptor, turn on the handset and
try again.
What should I do when the operating
time seems to be shorter even after I
fully charged the batteries?
L
Clean the battery ends (
S
,
T
) and the charge contacts with a
dry cloth and charge again.
Frequently asked questions
Question
Cause/solution
TG161x_171xFX(e)for_7 language_QG.book Page 6 Monday, February 7, 2011 2:50 PM
