Useful Information
25
*1 KX-TG1611
Programmable settings
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
I cannot use the intercom feature.
L
This feature is shared between the handsets.
Although the handset displays
“
Intercom
”
, this
feature is not available for this model.
Problem
Cause/solution
The display is in a language I
cannot read.
L
Change the display language (page 11).
Problem
Cause/solution
The handset beeps and/or
8
displays.
L
Battery needs charging. Fully charge the batteries
(page 9).
I fully charged the batteries, but
– battery level does not increase or
– the operating time seems to be
shorter.
L
Clean the battery ends (
S
,
T
) and the charge
contacts with a dry cloth and charge again.
L
It is time to replace the batteries (page 8).
Problem
Cause/solution
w
is flashing.
L
The handset is too far from the base unit. Move
closer.
L
The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base unit.
L
The handset is not registered to the base unit.
Register it (page 27).
Noise is heard, sound cuts in and
out.
L
You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources of
interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL service
provider) to the telephone line between the base unit
and the telephone line socket. Contact your DSL/
ADSL provider for details.
L
Unplug the base unit’s AC adaptor to reset the unit
and turn off the handset. Reconnect the adaptor, turn
on the handset and try again.
TG161xAL(e).book Page 25 Thursday, February 17, 2011 5:23 PM