Handset / Base unit
1
M
MENU
N#304
2
M
YES
N
3
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Playing back the greeting message
Handset / Base unit
1
M
MENU
N#303
2
Proceed with the operation for your unit.
Handset:
To exit, press
M
OFF
N
.
Base unit:
To exit, press
M
EXIT
N
.
Listening to messages
Important:
R
If your phone service provider offers voicemail
service, the voicemail service may answer calls
before the base unit’s built-in answering system
has a chance to answer calls and record
messages.
In this case, messages you expect to be
recorded by the answering system will be
recorded on the voicemail service. For more
information, see “For landline voicemail service
subscribers” (page 63).
R
When using the base unit or handset to listen to
messages, the noise reduction feature
(page 22) is activated automatically in spite of
the setting (
is not displayed).
Using the base unit
When new messages have been recorded:
–
M
N
on the base unit flashes.
–
“
New message
”
is displayed.
Press
M
N
(PLAY).
R
During playback,
M
N
on the base unit lights.
R
If new messages have been recorded, the base
unit plays back new messages.
R
If there are no new messages, the base unit
plays back all messages.
Operating the answering system during
playback
Key
Operation
MDN
or
MCN
Adjust the speaker volume
M
N
Repeat message
M
N
Skip message
M
PAUSE
N
Pause message
To resume playback, press
M
N
.
M
N
(STOP) Stop playback
M
ERASE
N
Erase currently playing message
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
Calling back (Caller ID subscribers only)
n
Using a landline:
Lift the corded handset during playback.
R
To edit the number before calling back, press
M
EDIT
N
repeatedly until the phone number is
shown in the desired format (page 51).
n
Using a cellular line:
Press
M
CELL 1
N
or
M
CELL 2
N
, then lift the
corded handset during playback.
R
To edit the number before calling back, press
M
EDIT
N
repeatedly until the phone number is
shown in the desired format (page 51).
Erasing all messages
Press
M
ERASE
N
2 times while the unit is not in use.
Using the handset
When new messages have been recorded,
“
New
message
”
is displayed.
1
To listen to new messages:
M
MENU
N#323
To listen to all messages:
M
MENU
N#324
2
When finished, press
M
OFF
N
.
Note:
R
To switch to the receiver, press
M
N
.
R
You can also use the
M
PLAY
N
soft key, if
displayed, to play new messages.
58
For assistance, visit www.panasonic.ca/english/support
Answering System for Landline
TG153CSK(en)_0422_ver021.pdf 58
2016/04/22 14:54:44