Panasonic KX-TG153CSK Скачать руководство пользователя

Страница: 54 / 80

Requirements

An Android device (Android 2.1 or later)

Text message (SMS) alert

For iPhone and BlackBerry

users

This feature alerts you on your DECT phone when
your paired cellular phone receives SMS
messages. The Link to Cell app is not required for

iPhone and BlackBerry users

Important:

Your cellular phone must support MAP
(Message Access Profile) specification.

For further information, refer to the instructions
on web page listed below:
www.panasonic.net/pcc/support/tel/sms/

To use this feature, the following settings are
required.
–

iPhone and BlackBerry Phone:

Bluetooth

must be turned on.

–

Handset or base unit:

“

Alert On/Off

”

must be turned on (page 54).

If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.

Alert settings for your DECT
phone

If your cellular phone is paired to the base unit and
receives notifications, the handset and/or base unit
can alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones

Important:

For Android users: Use the Link to Cell app to
enable the desired alerts (page 53).

Turning alert on/off

Once this feature is turned on, it will alert you on
the handset and base unit when your cellular
phone receives notifications.
–

“

”

(default): The handset and/or base unit

alert you.

–

“

Off

”

: The handset and/or base unit do not

alert you.

You can configure this setting using either the
base unit or one of the handsets.

Handset / Base unit

For CELL 1:

MENU

N#6101

For CELL 2:

MENU

N#6102

MbN

: Select the desired setting.

SAVE

Proceed with the operation for your unit.

Handset:

OFF

Base unit:

EXIT

Setting the voice alert

You can turn on/off the voice alert.
–

“

”

(default): The handset and/or base unit

notify you by voice announcement.

–

“

Off

”

: Voice announcement is not available as

alert.

You can configure this setting using either the
base unit or one of the handsets.

Handset / Base unit

For CELL 1:

MENU

N#6031

For CELL 2:

MENU

N#6032

MbN

: Select the desired setting.

SAVE

Proceed with the operation for your unit.

Handset:

OFF

Base unit:

EXIT

Selecting the alert tone

Handset

For CELL 1:

MENU

N#6041

For CELL 2:

MENU

N#6042

MbN

: Select the desired setting.

SAVE

OFF

Using a Bluetooth wireless
headset (optional) for
landline calls

By pairing a Bluetooth headset to the base unit,
you can have a hands-free conversation wirelessly
for landline calls.

Important:

Your Bluetooth wireless headset must support
the HeadSet Profile (HSP) specification.

1 headset can be paired to the base unit.

For assistance, visit www.panasonic.ca/english/support

Using Bluetooth® Devices

TG153CSK(en)_0422_ver021.pdf 54

2016/04/22 14:54:44

Содержание KX-TG153CSK

















































































Результаты поиска

Содержание KX-TG153CSK

Отзывы:

Похожие инструкции для KX-TG153CSK

Бренды по названию

Популярные бренды

Panasonic KX-TG153CSK, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG153CSK

Отзывы:

Похожие инструкции для KX-TG153CSK

Бренды по названию

Популярные бренды