Caller ID Service
17
DTMF mode setting
Certain service providers/telephone companies send caller information
between the first and second rings. If the display does not show caller
information after a few rings, follow these instructions to set DTMF mode.
1
{j
/OK
}
2
{v}
/
{e}
: “
SETTING BS
”
i
{>}
i
{
3
}
3
Enter base unit PIN (default: “
0000
”).
i
{
4
}
L
If you forget your PIN, contact your nearest Panasonic service centre.
4
Select DTMF mode by pressing
{
2
}
.
5
{>}
i
{ih}
L
To cancel DTMF mode, press
{
1
}
Storing/editing/erasing
1
{v}
/
{e}
: Select the desired entry.
i
{>}
2
■
Storing:
{v}
/
{e}
: “
SAVE TEL NO
”
i
{>}
i
{j
/OK
}
i
Enter the
party’s name (9 characters max.; page 11).
i
{j
/OK
}
i
{ih}
■
Editing:
{v}
/
{e}
: “
EDIT CALL NO
”
i
{>}
i
Press
{<}
or
{>}
to move
the cursor to the right of where you want to edit the number.
i
Edit
the phone number.
i
{C}
■
Erasing:
{v}
/
{e}
: “
CLEAR
”/“
ALL CLEAR
”
i
{>}
i
{v}
/
{e}
: “
YES
”
i
{>}
i
{ih}
Voice mail service
Voice mail is an automatic answering service offered by your service
provider/telephone company. After you subscribe to this service, your
service provider/telephone company’s voice mail system answers calls for
you when you are unavailable to answer the phone or when your line is
busy. Messages are recorded by your service provider/telephone
company, not your telephone.
When you have new messages,
0
is displayed on the handset
depending on your service provider/telephone company. Please contact
your service provider/telephone company for details of this service.
Important:
L
If
0
still remains on the display even after you have listened to new
messages, turn it off by pressing
{<}
for 1 second.
TG1311_1312CX(e).book Page 17 Friday, September 26, 2008 2:46 PM
