Panasonic KX-TG1283JXS Скачать руководство пользователя страница 7

Страница: 7 / 93

4 OPERATING INSTRUCTIONS

4.1. To Use the Unit in the Event of a Power Failure

The included battery box functions as an emergency power source for Panasonic cordless phones in the event of a power failure.

4.2. Battery

4.2.1. Battery Installation for Battery Box

This battery box can provide 6 V of emergency power supplied by standard 4 alkaline batteries of AA (LR6) size.

Important:

•

Use alkaline batteries. Operating time when using non-alkaline batteries will be dramatically shortened.

•

Do not use rechargeable batteries for battery box.

Battery caution for battery box

•

The batteries should be used correctly, otherwise the battery box may be damaged due to battery leakage.

•

Do not mix old, new or different types of batteries.

•

Do not charge, short-circuit, disassemble, or heat the batteries.

•

Do not dispose of batteries in a fire.

•

Do not use rechargeable batteries, such as nickel-cadmium (Ni-Cd) or nickel-metal hydride (Ni-MH) batteries.

•

It is recommended that batteries are replaced annually.

•

It is recommended that batteries are replaced after a power outage.

•

Operating time may be shortened depending on usage conditions, ambient temperature, and battery quality.

Battery life for battery box

During a power failure, the following performance will be available.

Alkaline batteries

Operation

Operating Time

While in use (talking)

6 hours max.

While not in use (standby)

13 hours max.

Note:

•

The operating time depends on the type of batteries.

•

Do not charge the handset in the event of a power failure. Operating time will be shortened.

KX-TG1283JXS / KX-TG1283JXT / KX-TCA122CXS / KX-TCA122CXT / KX-TCA121CXS / KX-TCA121CXT

Содержание KX-TG1283JXS






























































































Результаты поиска

Содержание KX-TG1283JXS

Отзывы:

Похожие инструкции для KX-TG1283JXS

Бренды по названию

Популярные бренды

Panasonic KX-TG1283JXS, Руководство по обслуживанию

Результаты поиска

Содержание KX-TG1283JXS

Отзывы:

Похожие инструкции для KX-TG1283JXS

Бренды по названию

Популярные бренды