manualshive.com logo in svg

Panasonic KX-TG1070FX, Руководство по эксплуатации, Страница: 22 / 24

Поделиться
Скачать
Panasonic KX-TG1070FX Скачать руководство пользователя страница 22

22

Useful Information

Answering system (KX-TG1090)

Cause & Solution

•

The answering system is turned off. Turn it
on (page 16).

•

The answering system is turned off. Turn it
on (page 16).

•

Message memory is full. Erase
unnecessary messages (page 17).

•

A caller is leaving a message. Wait for the
caller to finish.

•

The handset is too far from the base unit.
Move closer.

•

You are entering the wrong remote access
code. If you forget the remote access code,
reset to the default settings (page 11, 18).

•

You are pressing the dial keys too quickly.
Press each key firmly.

•

The answering system is turned off. Turn it
on (page 16).

•

You are using a pulse telephone. Try again
using a touch tone phone.

•

A call is being received. Answering the call
and try again later.

Problem

The unit does not record new
messages.

The other party complains that they
cannot leave a message.

I cannot operate the answering
system with the handset.

I cannot operate the answering
system remotely.

While recording a greeting message
or listening to messages, the unit
rings and recording stops.

Содержание KX-TG1070FX

























Отзывы:

Нет отзывов