background image

11

Useful Telephone Settings

Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333

Handset ringer volume

1

[

/OK] > [5]

2

Press [

] or [

] to select handset

ringer volume.

5 levels are available.

The handset plays the selected tone
at that volume while selecting.

3

[

/OK] to save the setting.

Handset key tone (On/Off)

1

[

/OK] > [6]

2

Press [

] or [

] to select handset

key tone “On” or “OFF”.

3

[

/OK] to save the setting.

Dial mode (Tone/Pulse)

1

[

/OK] > [7]

2

Press [

] or [

]  to select between

tone “1” and pulse “2” dial modes.

3

[

/OK] to save the setting.

Note:

Consult your service provider/telephone
company for details of this setting.

Auto talk

Auto talk feature allows you to answer
calls simply by lifting the handset off the
base unit or charger. You do not need to
press [

] key.

1

[

/OK] > [8]

2

Press [

] or [

]  to select between

“On” and “OFF”.

3

[

/OK] to save the setting.

Recall time

8 recall time values are available for
selection.
1

[

/OK] > [R]

2

Press [

] or [

]  to select a value

(options: 80, 100, 120, 180, 250, 300, 600
and 800ms) (factory setting: 100ms).

3

[

/OK] to save the setting.

Note:

Consult your service provider/
telephone company for details of this
setting.

Setting PIN

Set the PIN to prevent others from
accidentally resetting the telephone
settings.

Factory setting is “0000”.

Changing to a new PIN
If you change the PIN, please write down
your new PIN as the unit will not reveal the
PIN to you.

1

[

/OK] > [

]

2

Enter the current 4 digit PIN > [

/OK]

If a wrong PIN is entered, a long beep
will be heard.

3

Create a PIN (4 digits).

4

[

/OK]

5

Enter the newly created PIN again for
confirmation.

6

[

/OK] to save PIN.

If a wrong PIN is entered, a long beep
will be heard.

Resetting to default settings

Telephone settings (page 10) and
answering system settings (page 16 -18)
are reset to default settings.
1

[

/OK] > [9]

2

Enter the PIN (4 digits).

3

Press [

/OK] again to reset to default

settings.

Note:

If a wrong PIN is entered, a long beep
will be heard.

Date and time will not be reset.

The following items will be deleted:
-Redial list
-Phonebook entries
-Call log
-Recordings, including your greeting
message and caller messages

Содержание KX-TG1070E





























Отзывы: