Panasonic KX-TES824, Руководство по установке

Страница: 78 / 90

3.2 Connection
78 Installation Manual
3.2.3 Accessing PBX via Internal Modem
When the mode of the PBX outside (CO) line that will be accessed is 'MODEM':
1.
For Dial Number, enter the telephone number assigned to the internal modem of the PBX.
2.
Select Auto (Tone) or Auto (Pulse) for Dial Type.
3.
Click OK .
4.
Click OK . The PC will connect to the PBX.
When the mode of the PBX outside (CO) line that will be accessed is 'DISA':
1.
For Dial Number, enter the telephone number assigned to the internal modem of the PBX,
several pause symbols (',') and the Remote Maintenance Feature Number (for example:
01234567,,,,,729).
2.
Select Auto (Tone) for Dial Type.
3.
Click OK .
4. Click OK . The PC will connect to the PBX.
Notes
• The number of pause symbols to be inserted differs depending on the PC modem used.
• Auto (Pulse) Dial Type cannot be used.
When the mode of the PBX outside (CO) line that will be accessed is 'Normal':
1.
For Dial Number, enter the pause symbol (',').
2.
Select Manual for Dial Type.
3.
Click Initialise .
4. Click OK .
5.
Click OK .
6.
Dial the telephone number assigned to the outside (CO) line from a telephone connected in
parallel with the PC.
1. Start the KX-TE Maintenance Console software
from the start menu on your PC. (
Start
→
Programs
→
KX-TE Maintenance Console )
2. Type the Installer Level Programmer Code that was
set during the KX-TE Maintenance Console
installation.
3. Click the check box to connect to the PBX. Options
will appear as shown here, on the left.
4. Type the System Password. (default: 1234)
5. Select Modem , and click Setup .