Panasonic KX-TDE100, Руководство по программированию

Страница: 234 / 1018

Value Range
Yes, No
Maintenance Console Location
3.24 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Guide References
1.11.9 Parallelled Telephone
DPT Type—Type
Selects the port type.
To change the port type of an extension port, follow the steps below:
1.
Set the status of the extension port to " OUS ".
2.
Change the port type of the extension port, then click Apply .
3.
Set the status of the extension port to " INS ".
When changing the port type of an extension port for which Wireless XDP has been set on the
6.1 [4-1-1] Wired Extension—Extension Settings screen, the Wireless XDP setting must be deleted
first.
When changing the type of a port for which one or more SDN buttons are set (except when changing
between PC Console and Telephone), all SDN buttons customised for that device will be deleted. When
you attempt to apply the new settings, a warning message is displayed showing the slot and port number
for which SDN buttons will be deleted. If you do not wish to delete SDN buttons for this port, click
Cancel .
Value Range
Normal: For connecting a DPT or CS
DSS: For connecting a DSS Console (A maximum of 8 [with the KX-TDE100/KX-TDE200] or 64 [with the
KX-TDE600] DSS Consoles can be connected to the PBX.)
VM (DPT): For connecting a Panasonic VPS through DPT Integration
PC Console: For connecting a PC Console (A maximum of 8 PC Consoles can be connected to the PBX.)
Maintenance Console Location
3.24 [1-1] Slot—Port Property - Extension Port
Programming Manual References
3.25 [1-1] Slot—Port Property - Extension Port—Connection Command
Feature Guide References
1.24.1 Voice Mail (VM) Group
1.32.1 Computer Telephony Integration (CTI)
234 PC Programming Manual
3.24 [1-1] Slot—Port Property - Extension Port