Panasonic KX-TDA5450, Руководство по установке

Страница: 35 / 86

Attribute Description
Basic channel A subscriber channel.
If you select this attribute, the "
Set " button will become active,
which allows you to configure SIP Telephony Basic Settings
and SIP Telephony Detailed Settings .
Additional channel of ChN (N: 1–8) Subordinative channel that can be added to Basic channel
above. This setting is to be configured when several channels
can be used for one subscription with an ITSP. Selects a basic
channel number to which an additional channel is added.
Note
Channels 5 through 8 are only available when the SIP-DSP4 card is mounted on the SIP-GW4 card.
3.
Click the Reboot button that appears below the table after all the required configuration, including the
following SIP Telephony Basic Settings, is complete.
SIP Telephony Basic Settings
If you change the Channel Attribute to Basic channel in Channel Settings and click the corresponding
Set button, the following screen is displayed.
1.
Assign parameters in Server Settings based on the information provided by the ITSP.
Parameter & Description Default Value Range
Proxy Server
Specifies the domain name or IP address of a
proxy server (compulsory).
*1
If an ITSP provides
both Proxy and Registrar Server information,
specify the Proxy Server information.
No default Available domain names or IP
addresses (max. 83
alphanumeric characters)
*2
Registration
Specifies whether to register on the SIP server or
not (if required).
Enable
*3
Enable, Disable
Registration Timer (Offer)
Specifies the length of time that the card offers for
registration to the SIP server (if required).
*4
3600 sec
*3
20–86400 sec
Document Version 2008-10 Installation Manual 35
3.4.1 Channel & SIP Telephony