2.3 System Data Control
Feature Guide
233
Installation Manual References
3.3 Installation of the Hybrid IP-PBX PC Programming Software
Feature Guide References
2.3.2
PT Programming
Description
A proprietary telephone (PT) can be used to customize the settings of the PBX or of an extension, using the
following programming features:
Conditions
•
Class of Service (COS) programming determines the level of programming an extension user is
authorized to perform (
→
Programming Mode Limitation [516]):
–
System programming and personal programming
–
Personal programming only
–
No programming may be performed
•
The extension which is connected to the lowest numbered port on the card installed in the lowest
numbered slot can perform both personal programming and system programming regardless of the
extension's COS.
•
COS programming determines which extensions are manager extensions and can therefore perform
manager programming.
•
During programming, the PT is considered to be busy and will not receive calls.
•
Only one system programming (including PC programming) or manager programming session is
permitted at a time, i.e., these two programming features cannot be performed simultaneously by two
users.
Programming
Type
Description
Example
Authorized
Programmer
Personal
Programming
Used by an extension user to
customize the extension's settings.
PT Display Language,
Call Waiting Tone, etc.
Extension user
System
Programming
Used by an authorized party to
customize the PBX.
Intercept Destination,
ARS Mode, Date and
Time, etc.
Authorized
administrator or
extension user
Manager
Programming
Used by an extension assigned as a
manager to customize the current
state of an extension, or to grant
special privileges temporarily to an
extension user.
Switching the current
time mode, Remote
Extension Dial Lock,
Remote PIN Clear, etc.
Extension assigned
as a manager
Содержание KX-TDA50
