Panasonic KX-TDA30, Начало работы

Страница: 14 / 34

Installing the Trunk/Extension Cards
1.
Before installing the optional service cards, cut and remove the appropriate dummy cover plates from the
main unit.
Dummy Cover Plate
CAUTION
For safety reasons, smooth the cut edges after removing the dummy cover plates.
2.
Position the card in the open slot, making sure that the tabs on the both sides of the card fit into place.
Then, holding the card firmly in place, lower the rear end so that the hole of the card fits over the extension
bolt.
1
2
Extension Bolt
Optional Service Card
CAUTION
When installing the optional service cards, do not put pressure on any parts of the main board. Doing
so may result in damage to the PBX.
14 Getting Started
2.3 Installing the Optional Service Cards