Panasonic KX-TDA0484, Начало работы

Страница: 29 / 76

4.2 Programming the VoIP Gateway Card in the Los Angeles Office
Getting Started 29
4.2 Programming the VoIP Gateway Card in the
Los Angeles Office
Based on the example network in "1.2 Network Devices and Numbering Plan", this section
demonstrates the procedure to program a VoIP Gateway Card for use in the Los Angeles office,
as the first step of setting up a VoIP network. VoIP communications between the two offices
will be possible when the cards, as well as the PBXs, in both offices are fully programmed.
The procedure to program the card in the Chicago office is given in "4.3 Programming the VoIP
Gateway Card in the Chicago Office". In addition, the procedure to program the PBXs is given
in "5 Programming the PBX".
4.2.1 Starting the IP-GW4 Maintenance Utility
Make sure that a PC is connected directly to the VoIP Gateway Card with an Ethernet cross
cable (see "2.2.1 Connection for Programming" or "3.2.1 Connection for Programming").
The card should not be connected to the LAN at this point.
1. Start Internet Explorer from the Start menu.
2. a.
In the Address box of Internet Explorer,
type http://192.168.1.200 (default IP
address of the card).
b.
Press the ENTER key on the keyboard.
Notes
• If you cannot see the log-in screen,
return to "4.1.1 Preparing the PC"
and confirm that your PC has been
configured appropriately.
• If you forget the IP address, you
must initialize the card to the default
setting (see "C1 Initializing the VoIP
Gateway Card").
3. a.
In the Username box, type
Administrator (default user name).
b.
In the Password box, type
Administrator (default password).
c.
Click LOGIN .
Note
If you forget the user name or password,
you must initialize the card to the default
setting (see "C1 Initializing the VoIP
Gateway Card").