manualshive.com logo in svg

Panasonic KX-TD816G, Руководство пользователя, Страница: 73 / 250

Поделиться
Скачать
Panasonic KX-TD816G Скачать руководство пользователя страница 73

3.1.2

Programming Ways

User Programming (Manager Programming)

3-5

Advancing to the next stage

When “

MNG-PGM NO?->

” is displayed, you can select one of the following:

• To go to program [000], press the NEXT button. 

• To go to another program, enter the 3-digit program address.

Rotation of jack number

Each jack of our Digital Super Hybrid System supports the connection of a proprietary
telephone and an analog device with different extension numbers (eXtra Device Port: XDP
function).

To program this function it is necessary to assign two parts for each jack. The first part of jack
one is 01-1. The second part of jack one is 01-2. The first part of jack two is 02-1 and so on.
The NEXT and PREV buttons can be used to move from jack to jack as required.

Example;

#01-1

#01-2

#02-1

#02-2......

Note:

The first part of a jack is for a PT of a XDP-assigned jack. The second part is for a single line
device. Program [600] “EXtra Device Port” assigns which jacks are XDP.

Entering Characters

You can enter characters to store names for speed dial numbers, extension numbers, etc., by
using the dialing key pad and the buttons.

Each of twelve dialing keys on the dialing key pad has seven characters assigned. Refer to the
“Station Speed Dialing Number / Name Assignment (KX-T7235 only)” section in Section 2.2
Programming.

Storing your data

Press STORE to store your data.

• The STORE indicator lights red and confirmation tone sounds.

* Confirmation tone (one beep)

After pressing STORE, you will hear a beep. This informs you that your storage is
completed.

*Alarm tone (three beeps)

If you hear the alarm, check that your entry is valid.

Making another selection within the same program address

• To make the next higher selection, press NEXT.

• To make the previous selection, press PREV.

• To make a specific selection, press SELECT and then enter the number.

PREV

NEXT

PREV

NEXT

PREV

NEXT

Содержание KX-TD816G



























































































































































































































































Отзывы:

Нет отзывов