Panasonic KX-TD816E, Руководство по установке

Страница: 299 / 600

4.2 Manager Programming
System Speed Dialling Number Set
001
System Programming 4-17
Description
Used to program the System Speed Dial numbers. These numbers
are available to all extension users. The stored numbers are also
applied to CO Incoming Call Information Display / Log features.
Selection
• Speed dial number: 000 through 499
• Telephone number: 24 digits (max.)
Default
All speed dial numbers – Not stored
Programming
1. Enter 001.
Display: SPD Number Set
2. Press NEXT.
Display: SPD Code?–>
3. Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000: Not Stored
4. Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another speed dial number, press NEXT or
PREV, or SELECT and the desired speed dial number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• There is a maximum of 500 speed dial numbers. Each speed dial
number has a maximum of 24 digits. The valid characters are 0
through 9,
, and # keys, RECALL or FLASH, PAUSE, SECRET
and – (hyphen) buttons.
– To store the register recall signal, press RECALL or FLASH.
Note: The stored recall will be in effect only during an
established call. (Refer to Section 3 “External Feature
Access.”)
– To store a hyphen, press the “–” button.