Panasonic KX-TD816, Руководство по программированию

Страница: 173 / 443

2.5 Outside Line Programming
General Programming 173
[402] Dial Mode Selection
Description
Each outside line can be programmed for DTMF (Dual Tone Multi-Frequency), pulse (rotary)
or call blocking. This programme assigns your choice to each line.
DTMF:
The dialling signals from an extension, either tone or pulse, are converted to tone signals and
transmitted to the outside line.
Pulse:
The dialling signals from an extension, either tone or pulse, are converted to pulse signals and
transmitted to the outside line.
Call blocking:
If your central office can receive both DTMF and pulse signals but you are contracted for pulse,
select this mode. When dialling on the line with a touch tone telephone, only the pulse signals
are sent to the outside line.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all outside lines)
• DTMF / Pulse / C. Block (call blocking)
Default
KX-TD816BX, KX-TD1232(D)BX/ML, KX-TDN1232: All outside lines – Pulse
KX-TD816HK, KX-TD1232HK/X: All outside lines – DTMF
Programming
1.
Enter 402.
Display: 402 DIAL MODE
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Pulse
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.