Troubleshooting
Problem
Possible Cause
Solution
The handset does
not work.
The battery is drained.
Charge the battery fully.
(See “Charging the Battery” on
page 6.)
The power is OFF.
•
Turn it ON.
(See “Location of Controls” on
page 8.)
•
Re-insert the battery and try
again. (See “Battery
Installation” on page 5.)
The handset does
not ring.
Ringer volume is set to “
Off
”.
Adjust the ringer volume level.
(See “Adjusting the Ringer
Volume” on page 13.)
You cannot make/
receive a call.
The handset is out of range, or
the CS is busy.
Move closer to the CS or try again
later.
The radio channel is busy, or a
radio communication error
occurred.
Try again later.
You cannot dial.
The number that you dialed is
restricted by the PBX.
Consult your dealer.
Key lock mode is ON.
To cancel the mode, press the
Joystick for about 2 seconds.
(See “Key Lock” on page 9.)
The radio channel is busy or a
radio communication error
occurred.
Try again later.
The handset stops
working during
operation.
•
Turn the handset off, then turn
it back on.
(See “Location of Controls” on
page 8.)
•
Re-insert the battery and try
again.
(See “Battery Installation” on
page 5.)
You cannot use the
handset during a
power failure.
The handset will not function
during a power failure because
the PBX stops emitting
radiowaves.
64
Troubleshooting and Error Messages
Troubleshooting and Error Messages
Содержание KX-TD7685 - Wireless Digital Phone
Страница 75: ...75 Notes ...