Panasonic KX-TD208, Руководство по началу работы

Страница: 10 / 12

• • • 10 • • •
P Pr ro og gr ra am mm mi in ng g U Us si in ng g A A P Pe er rs so on na al l C Co om mp pu ut te er r
You can program the system data using the application software in the included
floppy disk on the IBM-PC/AT or a compatible personal computer. The system pro-
gramming data can be stored either on the floppy disk or on your hard disk.
To use the floppy disk for PC programming, you must have MS-DOS (or equivalent)
version 5.0 or later. A minimum of 450K of free conventional memory is required.
¢ ¢
File Configuration
The file name: TD208.EXE (Execution file)
You may store the following files if desired.
Database file: *.DBF
ASCII file: *.DBA
Screen save file: P208.PRT
£
The “*” represents the file name of your choice. (up to 8 characters)
¢ ¢
Setup
1.
Insert the floppy disk into drive A.
2.
Change the current directory to drive A.
3.
Type
TD208
after confirming the sign “>” and press the Enter key.
– The initial screen appears.
£
After the initial screen appears, you can remove the included disk and insert
a database file disk to save the data.
£
If your monitor is monochrome and you cannot see the cursor easily, exit the
programming mode and re-type
TD208/MONO .
£
If you need an explanation of the system and its operations, press F4 (Help)
on the initial screen. A Help screen will appear.
£
This program is guaranteed to work with MS-DOS only. It is not guaranteed
with MS-DOS in Windows.
Programming
!
!
!
!