Panasonic KX-TD1232NE Скачать руководство пользователя страница 29

Страница: 29 / 352

2.1

Manager Programming

General Programming

10.

Press STORE.

11.

Press NEXT.

Display example: 00:00

12.

Enter the hour.

To change the current entry, press CLEAR and the new hour.

13.

Press .

14.

Enter the minute.

To change the current entry, press CLEAR and new minutes.

15.

Press STORE.

16.

Press END.

Conditions

•

After changing an entry, you can press STORE. You do not have to perform all of the rest
of the steps.

•

To go back to the previous field, press

at steps 4 through 9 and steps 13 through 14.

•

If you hear an alarm after pressing STORE, check that the date is valid.

•

The clock starts immediately after the STORE button is pressed.

•

You cannot leave the entry empty.

•

The time is adjusted automatically, if the first outgoing call is made through ISDN line after
three o'clock each morning.

Feature References

Display, Time and Date

Содержание KX-TD1232NE

































































































































































































































































































































































Результаты поиска

Содержание KX-TD1232NE

Отзывы:

Panasonic KX-TD1232NE, Руководство по программированию, Страница: 29 / 352

Результаты поиска

Содержание KX-TD1232NE

Отзывы: