Panasonic KX-TD1232JT, Руководство по программированию

Страница: 93 / 402

2.2 System Programming
General Programming 93
[130] Phantom Extension Number Set
Description
Assigns the phantom extension numbers. Each number will be assigned to a flexible CO or
DSS (Direct Station Selection) button and used as a Phantom Extension button.
Selection
• Location number: 001 through 128
• Phantom extension number: 2 through 4 digits
Default
All locations – Not stored
Programming
1.
Enter 130.
Display: Phantom NO.
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4.
Enter a phantom extension number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another location, press NEXT or PREV, or SELECT and the desired
location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each phantom extension number has two through four digits, consisting of numbers 0
through 9.
• The first one or two digits of the phantom extension numbers are subject to programme
[100]
Flexible Numbering, (01) through (16) 1st through 16th hundred extension blocks.
• Phantom extension numbers and other extension numbers should be different. Double entry
and incompatible entry for these numbers are invalid. Valid entry example: 10 and 11, 10
and 110. Invalid entry example: 10 and 106, 210 and 21.