Station Features and Operation (DPT/SLT)
User Manual
167
Re-try
Conditions
Calling an extension
•
You can choose Non Security or All Security mode. In All Security mode, the caller
must enter a pre-assigned DISA user code to make intercom calls.
•
If the DISA call is not answered within a specified period of time, the system redirects
it to the pre-determined IRNA destination.
If IRNA destination is not programmed, the DISA call continues to ring at the first
destination extension.
Calling an outgoing outside line
•
You can choose Non Security, Outside Line Security or All Security mode. In Outside
Line Security mode, the caller must enter a pre-assigned DISA user code to make
outside calls. In All Security mode, the caller must enter a pre-assigned DISA user code
to make both outside and intercom calls.
General
•
If the caller does not dial any digits during and after the playback of DISA outgoing
message, the system will direct him or her to the pre-determined destination (Intercept
Routing). "Intercept Routing" is activated 5 seconds after (default) or immediately after
the playback depending on System Programming.
•
DISA User Code
You can store up to 32 programmable DISA user codes. These codes can have four to
ten digits, and they must be unique. You can assign a "Class of Service" number to each
code. The "Class of Service" appended to the code denies the "Toll Restriction".
•
DISA User Code Entry Failure
If the DISA caller fails to enter the valid DISA user code three times consecutively, the
call will be disconnected.
•
DISA built-in Automated Attendant Number
This system supports up to ten programmable DISA built-in auto attendant numbers.
After listening to the DISA message, you can dial a single digit.
From Outside Telephone
It is possible (by System Programming) to dial a different number during a conversation
with an outside party or while hearing a ringback, reorder, or busy tone.
Press .
desired no.
• You hear a dial tone.
• If you dial "
"while hearing a DISA outgoing message,
dial tone, or after the DISA outgoing message, the call
will be disconnected.
• You must dial a line access code (9 or 81 through 88)
when calling an outside party.
Dial the desired number.
Содержание KX-TD1232C
