Panasonic KX-TCD735EM Скачать руководство пользователя

Страница: 80 / 114

Answering System Operations with the Handset

To playback new recorded
message(s)

Press

(INT)

then

After the function menu is displayed,

press

until the arrow points

to “

Play New Msg

”, then press

Press

(4)

•

New recorded message(s) is/are played
back from the speaker on the handset if
recorded.

•

The unit will announce the remaining
recording time after playback.

•

The display will return to “

Remote

Operation

”. To return to the standby

mode, press

or wait for 30 seconds.

To playback all recorded
message(s)

Press

(INT)

then

After the function menu is displayed,

press

until the arrow points

to “

Play All Msg

”, then press

Press

(5)

•

All recorded message(s) is/are played back
from the speaker on the handset if
recorded.

•

The unit will announce the remaining
recording time after playback.

•

The display will return to “

Remote

Operation

”. To return to the standby

mode, press

or wait for 30 seconds.

Recorded Message

Incoming messages and memo messages are stored in chronological order. New messages cannot be
recorded when “

Memory is Full

” is heard. We recommend you to erase unnecessary message after

each playback in order to leave more time for recording new message(s). If new message(s) is/are
recorded, the number of recorded message on the handset display will flash. When memory is full, it
will flash faster.

Make sure that the power is ON (p. 15), and the unit is in the standby mode.

During playback of a recorded message, press

then

•

One recorded message is erased.

•

If erasing message with more than 1 new message in memory then second message will begin
playback.

•

The display will return to “

Remote Operation

”. To return to the standby mode, press

or wait for 30 seconds.

To erase one recorded message with direct command

KX-TCD735EM(E)-4(76~100) 01.10.22 16:16 Page 80

Содержание KX-TCD735EM



















































































































Результаты поиска

Содержание KX-TCD735EM

Отзывы:

Похожие инструкции для KX-TCD735EM

Бренды по названию

Популярные бренды

Panasonic KX-TCD735EM, Руководство по эксплуатации

Результаты поиска

Содержание KX-TCD735EM

Отзывы:

Похожие инструкции для KX-TCD735EM

Бренды по названию

Популярные бренды