A n n e
33
1
Press
while entering a name.
2
Press
or
until the arrow points
to the desired character mode, then press
.
•
The character mode is displayed.
A n n
An
To enter names selecting characters
The dialling buttons can be used to enter letters and character symbols. The letters are printed on the
dialling buttons. Pressing each button selects a character as shown on page 34, 35.
If you make a mistake while entering a name
Press
or
to move the cursor to the incorrect character, press
to delete, and enter the
correct character. Pressing
erases the character to the left of the cursor. To erase all characters,
press and hold
.
C
C
C
For example, to enter “Anne”:
1.
Press .
2.
Press ,
then TWICE.
3.
Press ,
then TWICE.
4.
Press TWICE.
3
6
6
2
< E n t e r N a m e >
A B C
0 — 9
ΑΒΓ
To change the character mode
You can select one of 6 character modes by pressing
during entering a name.
The factory preset is “ABC”.
ABC: Alphabet (Capital/lower
*
)
0–9: Numeric
ΑΒΓ
: Greek
AÄÅ: Extended 1 (Capital/lower
*
)
*
To change from capital to lower case, press
. Each time you press
, the mode will change.
Basic Operations
Chapter 2
A
: Russian
: Extended 2 (Capital/lower
*
)
KX-TCD715EM-4Basic2 01.7.19 2:13 PM Page 33
H
