Panasonic KX-TCD706SLS, Руководство по эксплуатации, Страница: 81 / 120

81
Chapter 4
Advanced Operations
Storing the remove digit in the
route exception table
1
Press .
2
Press or until the arrow points
to “
Setting Base
”, then press .
3
Press or until the arrow points
to “
System
”, then press .
4
Enter the 4-digit base unit PIN (p. 83).
•
“
Input Command
” is displayed.
5
Press then .
6
Press then .
•
The current carrier code is displayed on
the 3rd line, if already set.
7
Enter the remove digit up to 12 digits,
then press
.
•
If you don’t need to store a remove digit,
enter “0”.
8
Press .
•
A beep sounds.
•
To return to the standby mode, press
.
•
The remove digit must be less than the area
code(s) stored in the route exception (p. 79).
0
6 6
6 6 0 # 1 #
S a v e ?
Ex. Remove digit “1”
Storing the remove digit in the
route selection table(s)
1
Press .
2
Press or until the arrow points
to “
Setting Base
”, then press .
3
Press or until the arrow points
to “
System
”, then press .
4
Enter the 4-digit base unit PIN (p. 83).
•
“
Input Command
” is displayed.
5
Press then .
6
Enter the corresponding route selection
table (1–4) (see page 79), then press
.
•
The current carrier code is displayed on
the 3rd line, if already set.
7
Enter the remove digit up to 12 digits,
then press
.
•
If you don’t need to store a remove digit,
enter “0”.
8
Press .
•
A beep sounds.
•
To return to the standby mode, press
.
•
The remove digit must be less than the area
code(s) stored in the route selection (p. 79).
6 6
6 6 1 # 4 #
S a v e ?
Ex. Route selection table 1
Remove digit “4”
Storing the Remove Digit
Remove digit(s) (up to 12 digits) can be stored in the route exception/selection table(s).
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
KX-TCD706SLS(E)-5Advance1 01.1.30 10:42 AM Page 81