Panasonic KX-TCD705RUM, Руководство по обслуживанию

Страница: 2 / 80

1 LOCATION OF CONTROLS 4
1.1. Base Unit 4
1.2. Handset 4
1.3. Displays 5
2 DISASSEMBLY INSTRUCUTIONS 6
2.1. Assembly the LCD to P.C. Board (Handset) 7
3 SETTINGS 8
3.1. Connections 8
3.2. Using the Belt Clip 9
3.3. Batteries 9
4 OPERATIONS 11
4.1. Turning the Power On 11
4.2. Making a Call 11
4.3. Terminating a Call 11
4.4. Answering Call 11
4.5. Turning the Power Off 11
4.6. Handset Programming 12
4.7. Base Programming 15
5 CIRCUIT OPERATION (BASE UNIT) 17
5.1. THE BASE-BAND SECTION 17
5.2. THE LINE INTERFACE SECTION (SEE BLOCK
DIAGRAM Fig. 17) 20
5.3. RF MODULE 23
6 CIRCUIT OPERATION (HANDSET) 24
6.1. THE BASE BAND SECTION 25
6.2. RF SECTION 30
7 CHECK PROCEDURE (BASE UNIT) 31
7.1. EQUIPMENT REQUIRED 31
7.2. INITIAL POWER TESTS 31
7.3. SET THE CLOCK FREQUENCY 32
7.4. LOOPBACK TESTS 32
7.5. TELEPHONE LINE TESTS 33
7.6. CHARGE CURRENT TESTS 33
8 CHECK PROCEDURE (HANDSET) 34
8.1. EQUIPMENT REQUIRED 34
8.2. INITIAL POWER TESTS 34
8.3. SET CLOCK FREQUENCY 35
8.4. LOOPBACK TESTS 35
9 TROUBLESHOOTING GUIDE 36
9.1. HANDSET: DOES NOT OPERATE 36
9.2. HANDSET: LINK 37
9.3. HANDSET: DOES NOT LINK 39
9.4. BATTERY DOES NOT CHARGE 40
9.5. NO VOICE RECEPTION 40
9.6. NO VOICE TRANSMISSION 41
9.7. BASE UNIT: DOES NOT LINK 42
9.8. BASE UNIT : CALLER ID PROBLEMS 43
10 CABINET AND ELECTRICAL PARTS LOCATION (BASE UNIT)
44
11 CABINET AND ELECTRICAL PARTS LOCATION (HANDSET) 45
12 ACCESSORIES AND PACKING MATERIALS 46
13 REPLACEMENT PARTS LIST 47
13.1. Base Unit 47
13.2. Handset 49
14 EEPROM LAYOUT (BASE UNIT) 52
14.1. Scope 52
14.2. Introduction 52
14.3. EEPROM Layout 52
14.4. Appendix 57
15 EEPROM LAYOUT (HANDSET) 62
15.1. Scope 62
15.2. Introduction 62
CONTENTS
Page Page
2
KX-TCD705RUM / KX-TCD705RUS