Panasonic KX-TCD705E Скачать руководство пользователя страница 8

Страница: 8 / 56

◆

Battery Caution:

To reduce the risk of fire or injury to persons, read and follow these instructions.

1. Use only the batteries specified.

2. Do not use non-rechargeable batteries.

3. Do not mix old and new batteries.

4. Do not dispose of the batteries in a fire, they may explode. Check with local waste

management codes for special disposal instructions.

5. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause

burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

6. Exercise care in handling the batteries in order not to short the batteries with

conductive materials such as rings, bracelets, and keys. The batteries and/or
conductor may overheat and cause burns.

7. Charge the batteries provided with or identified for use with this product only in

accordance with the instructions and limitations specified in this manual.

➡

Getting Started

◆

Battery Replacement

If “

” flashes after a few telephone calls even when the handset batteries have been

fully charged, it is time to replace the batteries with new ones. Remember to charge the
new batteries after replacement (see page 7).

• Discard defective batteries as soon as possible. Defective batteries may leak into the

unit.

• On replacing the batteries, ensure that the correct battery type selection is

programmed (page 39).

For maximum distance and noise-free operation, the recommended base unit location
is:
• Away from electrical appliances such as TV, radio, personal computer or another

telephone.

• In a convenient high and central location.

Operating Range

The range of operation depends on the construction of your home, weather and usage
conditions:

• Normally you will get longer range outdoors than indoors.

• Obstacles such as walls, metal shelves or cement-iron walls may shorten the operating
range.

Noise

Occasional noise or interference may occur due to other random radio waves.

◆

Base Unit Location

30678_KX-TCD705G_a_English 8/5/01 6:58 am Page 8

Содержание KX-TCD705E

























































Результаты поиска

Содержание KX-TCD705E

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-TCD705E, Руководство по эксплуатации

Результаты поиска

Содержание KX-TCD705E

Отзывы:

Бренды по названию

Популярные бренды