Panasonic KX-TCD400E страница 30 Скачать руководство пользователя | Manualshive

Страница: 30 / 32

background image

30

Guarantee

CONDITIONS OF GUARANTEE

This guarantee is in addition to and does not in any way affect any statutory or other rights of
consumer purchasers. If within the applicable guarantee period, the appliance proves to be

defective by reason of faulty design, workmanship or materials, we undertake subject to the

following conditions to have the defective appliance (or any part or parts there of) repaired or
replaced free of charge.

1. The appliance shall have been purchased and used solely within either the UK or ROI and

in accordance with standard operating instructions and the technical and/or Safety
Standards required in the UK.

2. The appliance should be returned together with this guarantee and proof of date of

purchase promptly on being found defective at the purchaser's risk and expense to the
authorised dealer from whom the appliance was purchased or to the nearest authorised

dealer. All enquires must be through such dealers.

3. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse,

wear and tear, neglect, incorrect adjustment or repair, to damage caused through

installation, adaption, modification or use in an improper manner or inconsistent with the

technical and/or safety standards required in the country where this appliance is used, or
to damage occurred during transit to or from the purchaser.

4. If at any time during the guarantee period any part or parts of the appliance are replaced

with a part or parts not supplied or approved by us or of an objective quality safe and
suitable for the appliance, or the appliance has been dismantled or repaired by any person

not authorised by us, we shall have the right to terminate this guarantee in whole or in part

immediately without further notice.

5. The purchaser’s sole and exclusive remedy under this guarantee against us is for the

repair or replacement of the appliance or any defective part or parts and no other remedy,

including, but not limited to, incidental or consequential damage or loss of whatsoever
nature shall be available to the purchaser.

6. This guarantee shall not apply to batteries and any other items of limited natural life.

7. Our decision on all matters relating to complaints shall be final. Any appliance or defective

part which has been replaced shall become our property.

8. The guarantee period applicable to this product shall be 12 months.

Please keep these Operating Instructions with your receipt.

Panasonic Business Systems U.K.

Receipt No.

Date of Purchase

Model No. KX-TCD400E

Serial No.

400E.book Page 30 Thursday, June 12, 2003 2:48 PM

«
...
28
29
30
31
32
»

Содержание KX-TCD400E

































Отзывы:

Нет отзывов

Похожие инструкции для KX-TCD400E

Бренд: Jabra Страницы: 2

Бренд: Panasonic Страницы: 8

Berkshire 400 Plus

Бренд: ATL Product Страницы: 4

Бренд: Uniden Страницы: 52

DECT1725 Series

Бренд: Uniden Страницы: 44

Бренд: Northland Страницы: 7

Бренд: VoipTel Страницы: 6

Бренд: Wacker Neuson Страницы: 44

Бренд: 2N Страницы: 32

Bamboo BLP7670-001

Бренд: Blaupunkt Страницы: 5

Бренд: Parkside Страницы: 71

Бренд: Leviton Страницы: 2

Бренд: Panasonic Страницы: 36

Бренд: Panasonic Страницы: 36

KX-TGC310 Series

Бренд: Panasonic Страницы: 36

Бренд: Panasonic Страницы: 36

Бренд: Panasonic Страницы: 48

Бренд: Panasonic Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды