Panasonic KX-TCD320E, Руководство по эксплуатации

Страница: 40 / 72

SMS (Short Message Service)
40 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Message Centre 1 is used for sending SMS
messages, and Message Centre 2 is used
for receiving messages.
L
Consult your service provider for more
information.
1
Press
$
(middle soft key).
2
Select
X
, then press
,
.
3
Select “
Public
” , then press
,
.
4
Select “
Settings
” , then press
,
.
5
Enter “
0000
” (default base unit PIN).
L
If you changed the PIN, enter it (page
34).
6
Select “
Message Centre1
” or
“
Message Centre2
” , then press
,
.
7
Edit the number as necessary, then
press
,
.
8
Select “
Save
” , then press
,
.
9
Press
{ih}
.
Note:
L
If your phone is connected to a PBX, you
need to add the PBX line access number
and a dialling pause to the beginning of
the Message Centre 1 phone number.
Registering mailboxes
Each SMS mailbox you wish to use must be
registered with BT Text. There are two ways
you can register a mailbox:
– Send an SMS message to another
person.
– Send the text message ‘REGISTER’ to
destination number 00000.
Sending a message
Writing and sending a new
message
1
Press
$
(middle soft key).
2
Select
X
, then press
,
.
3
To access the public mailbox
Select “
Public
” , then press
,
.
To access a private mailbox
Select the desired mailbox, press
,
,
then enter its password.
4
Select “
Create
” , then press
,
.
L
If “
^
Use Last Text?
” is displayed,
you can use the text from the last
message you created by pressing
{e}
. This message will be displayed
only if the last message was created
using the same mailbox you selected
in step 3.
5
Enter the message (page 45), then
press
,
.
6
Enter the destination phone number (20
digits max.), then press
,
.
L
To send the message to a party saved
in the handset phonebook, press
U
, select the handset phonebook
entry, then press
,
2 times.
L
To send the message to a party logged
in the caller list, press
{e}
or
{v}
repeatedly to select the party, then
press
,
2 times.
L
To send the message to a phone
number logged in the redial list, press
q
repeatedly to select the phone
number, then press
,
2 times.
L
If you wish to send the message to the
other party’s mailbox, enter the other
party’s mailbox number after the
destination phone number.
TCD320E(e).book Page 40 Friday, January 7, 2005 10:01 AM