–
2
–
Displays
Display icons
Various icons appear on the handset display to indicate the current status of the unit.
Menu icons
When in standby mode, pressing the middle soft key reveals the handset’s main menu. From
here you can access various features and settings.
w
Within range of a base unit
L
When flashing: Handset is
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
x
Handset is accessing base unit.
(intercom, paging, changing
base unit settings, etc.)
k
Handset is on an outside call.
x
Call bar is on.
y
Missed call (Caller ID
subscribers only)
i
Batteries are charging.
1
Battery strength
e
Alarm is on.
d
Voice enhancer is set to high or
low tone.
U
Ringer volume is off.
f
Night mode is on.
[2]
Handset number: The left icon
shows handset 2 example.
-2-
Base unit number: The left
icon shows base unit 2
example.
h
New SMS message received
(SMS users only)
j
Your written SMS message is
over 160 characters. (SMS
users only)
m
SMS memory is full. (SMS
users only)
{
Line is being used by another
handset.
W
Caller List
X
SMS
(Short Message Service)
b
Time Settings
Y
Handset Setup
Z
Base Unit Setup
a
Display Setup
TCD300E_QG(e).fm Page 2 Thursday, October 7, 2004 10:49 AM