Preparation
12
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Connections
When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.
Important:
L
Use only the AC adaptor and telephone
line cord supplied with this unit.
Note:
L
After connection, you must charge the
batteries to make or answer calls with the
handset (page 12).
L
Never install telephone wiring during a
lightning storm.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
L
The unit will not work during a power
failure. We therefore recommend you also
connect a standard telephone to the same
telephone line using a T-adaptor. Your
Panasonic sales shop can offer you more
information about connection possibilities.
Battery installation
1
Insert the batteries negative (
T
)
terminal first.
2
Close the handset cover.
Note:
L
Use only rechargeable batteries (page 7).
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
(220–240 V, 50 Hz)
To telephone
network
Hook
TCD240E(e).book Page 12 Thursday, June 9, 2005 9:14 AM