Panasonic KX-TCD200E Скачать руководство пользователя страница 40

Страница: 40 / 44

Useful Information

Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333

While storing an entry in the
phonebook or assigning a one
touch dial, the handset starts to
ring.

A call is being received. To answer the call, press

{C}

. Programming will be cancelled. Start again.

Pressing

{R}

does not

display/dial the last number dialled.

The redialled number was more than 24 digits long.
Redial the number manually.

The handset beeps intermittently
and/or

flashes.

Fully charge the batteries (page 9).

I fully charged the batteries, but

still flashes.

Clean the charge contact and charge again (page
9).

It is time to replace the batteries (page 10).

Caller information is not displayed.

You must subscribe to Caller ID service.

Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.

While viewing caller information,
the display returns to standby
mode.

Do not pause for over 1 minute while searching.

I cannot register a handset to a
base unit.

The maximum number of base units (4) are already
registered to the handset. Cancel unused base unit
registrations from the handset (page 33).

The maximum number of handsets (6) are already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 32).

You entered the wrong PIN number. If you forget
your PIN, consult your nearest Panasonic service
centre.

Locate the handset and the base unit away from
other electrical appliances.

Problem

Cause & solution

TCD200E(e-e).book Page 40 Wednesday, February 9, 2005 2:58 PM

Содержание KX-TCD200E













































Результаты поиска

Содержание KX-TCD200E

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-TCD200E, Руководство по эксплуатации

Результаты поиска

Содержание KX-TCD200E

Отзывы:

Бренды по названию

Популярные бренды