6-A Battery
Recharge
When the RECHARGE indicator flashes
or the unit beeps intermittently, place the
handset on the base unit for about
15 hours to recharge the battery.
6-B Base Unit Location
Calls are transmitted between the base unit and the handset using wireless
radio waves.
For maximum distance and noise-free operation,
the
recommended base unit location is:
Battery information:
After your Panasonic battery is fully charged:
While in use (TALK)
While not in use (Standby)
Up to about 5 hours
Up to about 14 days
RECHARGE
Indicator
•
The battery operating time may be shortened depending on usage
conditions and ambient temperature.
•
As preventative maintenance, clean the handset and the base
unit charge contacts with a soft, dry cloth once a month.
Clean more often if the unit is subject to grease, dust or
humidity.
Otherwise the battery may not charge properly.
•
If the battery is fully charged, you do not have to place the handset
on the base unit until the RECHARGE indicator flashes. This will
maximize the battery life.
•
The battery cannot be overcharged.
Operation
Operating time
6-C Wall Mounting
This unit can be mounted on a wall.
Away from electrical appliances
such as a TV, personal computer,
cellular phone charging units
or another cordless phone.
In a HIGH and CENTRAL
location with no obstructions
such as walls.
Extend
fully.
1
Pull down the handset
hook until it locks,
so the
tab holds the handset.
2
Press the tabs in
the direction of the
arrows (
#
), then
remove the wall
mounting adaptor
(
$
).
6
Things You Should Know
Screws (not included)
8.3 cm
Hooks
For Australia
To Telephone Plug
and Socket
OR
For New Zealand
To Single-Line
Telephone Jack
3
Connect the AC adaptor.
Tuck the telephone line cord
inside the wall mounting
adaptor, then push it in the
direction of the arrows
(
#
and
$
).
•
The word “UP WALL”
should face upward.
4
Connect the telephone
line cord. Install screws
using the wall template
below. Mount the unit,
then slide down.
•
Extend the antenna fully.
•
Fasten the cords to prevent it
from being disconnected.
2
1
1
1
2
To Power
Outlet
8.3 cm
Wall Template
Battery replacement:
If you cleaned the charge contacts and fully charged the battery,
but after a few telephone calls, the RECHARGE indicator flashes,
the battery needs to be replaced. Replace the battery with a new
Panasonic P-P301 (KX-A36A) battery. See section 1-C, step 2.
When replacing the battery, programmed information may be
erased. Reprogram if necessary.
