manualshive.com logo in svg

Panasonic KX-TC1484F, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TC1484F Скачать руководство пользователя страница 31

Troubleshooting

“

31

Useful Information

For assistance, please call: 1-800-211-PANA(7262)

Problem

The unit does not work.

An alarm tone sounds.

Static, sound cuts in/out,
fades. Interference from
other electrical units.

The handset does not ring.

The handset display is
blank.

You cannot program items,
such as the dialing mode.

Cause and Remedy

≥

Check the settings (p. 7–9).

≥

Charge the battery fully (p. 8).

≥

Clean the charge contacts and charge
again (p. 9).

≥

Install the battery properly (p. 8, 30).

≥

Place the handset on the base unit and
unplug the AC adaptor to reset. Plug in,
and try again.

≥

You are too far from the base unit. 
Move closer and try again.

≥

Place the handset on the base unit and
try again.

≥

Plug in the AC adaptor.

≥

Raise the base unit antenna.

≥

Locate the handset and the base unit
away from other electrical appliances
(p. 3).

≥

Move closer to the base unit.

≥

Raise the base unit antenna.

≥

Press 

(CH/FUNCTION)

to select a clearer

channel in the talk mode.

≥

The ringer volume is set to OFF. Set to
ON (p. 9).

≥

If a power failure occurs, the handset
loses communication with the base.
When power returns, place the handset
on the base unit once then try again.

≥

Install the battery properly (p. 8, 30).

≥

Charge the battery fully (p. 8).

≥

Programming is not possible while the
unit is in the talk mode or when viewing
the Caller List/phone book.

≥

Do not pause for over 60 seconds while
programming.

≥

Move closer to the base unit.

≥

(›)

or 

(‹)

may have been pressed

when you picked up the handset. Press

(OFF)

and try again.

PQQX13745ZA-5  03.6.25 9:37 PM  ページ 31

Содержание KX-TC1484F













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды