7
AUTO DIAL/STORE:
Used for speed
dialling or storing program changes.
8
TRANSFER:
Used to transfer a call to
another party.
9
REDIAL:
Used to redial.
10
HOLD:
Used to place a call on hold.
11
SP-PHONE (Speaker Phone):
Used for
the handsfree operation.
12
Navigator Key:
Used to adjust the volume
and the display contrast or select desired
items for each function.
15
PAUSE:
Used to insert a pause during
dialling.
16
MESSAGE:
Used to leave a message
waiting indication or call back the party
who left the message waiting indication.
13
Programmable Feature (PF) Button:
Used as an One-touch Dialling button
(Button assignment is required).
17
Message/Ringer Lamp:
The Message/
Ringer lamp informs you visually that you
have a message or a call.
When you receive a call, the lamp
flashes depending on the ringing pattern.
When someone has left you a message,
the lamp is lit continuously.
When the ringing pattern is set to Single
(Slow flash), Double (Moderate flash), or
Triple (Rapid flash) in your PABX, the
lamp flashes. When the other ringing
patterns are set in your PABX, the lamp
may not flash (e.g., S-Double, Call
Waiting Tone1).
14
Flexible Outside (CO) Line Button:
Used to make or receive an outside call.
Pressing this button seizes an idle outside
line automatically. (Button assignment is
required.) Also used as the desired
function buttons. (Button assignment is
required.)
6
AUTO ANS (Auto Answer):
Used to
receive an incoming call in the hands-free
mode.
MUTE:
Used to mute the microphone
during a conversation.
1
PROGRAM:
Used to enter and exit the
programming mode.
4
FWD/DND (Call Forwarding/Do Not
Disturb):
Used to perform Call Forwarding
or Do Not Disturb.
5
FLASH/RECALL:
Used to disconnect the
current call and make another call without
hanging up.
2
CONF (Conference):
Used to establish a
multiple party conversation.
3
INTERCOM:
Used to make or receive
intercom calls.
– 9 –
Location of Controls
