
Issue 2
8
Configuration
Feature Button Descriptions
AUTO ANSWER/MUTE Button
Used for extension auto answer, it turns the microphone off
during a conversation.
AUTO DIAL/STORE Button
Used for System Speed Dialling and for storing program
changes.
CONF (Conference) Button
Used to establish a three-party conference.
Flexible Exchange line Button
Used to seize the Exchange line or access one of several
features.
Function (F1 through F12) Button
Used to perform the programmed function or operation.
FWD/DND (Call Forwarding/Do Not Disturb) Button
Used to program the Call Forwarding feature or set the Do
Not Disturb (DND) feature.
HOLD Button
Used to place a call on hold.
INTERCOM Button
Used to make or receive extension calls.
MESSAGE Button
Used to call back the message sender.
MONITOR Button
Used for handsfree dialling operation.
PAUSE / PROGRAM Button
Used to enter into Station Programming mode and to exit
from Station Programming mode.
Inserts a pause in speed dial numbers
or in other numbers
RECALL Button
Sends a Register Recall signal to the central office or to a
host PBX to access the system features. If a PBX is not being
used, this button can be used to disconnect the current call
and start another call without requiring that you hang up.
REDIAL Button
Used to redial the last external number.
SP-PHONE (Speakerphone) Button
Used for handsfree speakerphone operation.
TRANSFER Button
Transfers a call to another extension or to an external
destination.
VOLUME Control
Used to adjust the speaker volume.
SAVE Button
The current dialled number can be saved for later redialling
.