22
Finding the controls
Main unit
5
1
2
3 4
6
14
12
15 16
19
18
17
13
8
9
10
11
7
1
Liquid crystal display
The display turns off after about 2 minutes
of inactivity.
To turn on the display, press
(Stop).
2
Call/Fax List
button starts a search in
— the Number Display (Caller ID) log.
— the fax list stored in memory.
Call/Fax List
indicator lights when
— a call was missed.(For Number Display
service users.)
— a fax was stored in memory.
3
Speed Dialer
button
4
Function
button initiates programming.
5
Volume/Change/Redial/Phonebook
key
To adjust the volume (see below).
To change Hiragana into Kanji.
To adjust the
ringer volume
when the unit
is on stand by
(Select “
呼出音量変更
”)
(Set)
(press repeatedly)
To adjust the
receiver volume
while
talking, press
repeatedly.
To adjust the
speaker volume
while
listening to the recorded messages or
using the monitor, press
repeatedly.
To redial the phone numbers in
the redial list. The last 10 phone
numbers dialed are stored in
memory.
To use the phonebook.
6
Auto Answer
button & indicator
—light on: answering device activated.
—light off: used as a regular telephone.
7
Playback
button plays back recorded
messages.
Flash
button (For call waiting service users.)
8
Fax
button starts faxing.
9
Copy
button starts copying.
10
Power
indicator
11
SD Memory Card cover
12
SD
indicator
13
Multi-operation
buttons refer to the function
displayed on the display panel.
14
Hold
button
15
Intercom
button
16
Monitor
button
17
Tone
button switches to tone dialing.
Night mode
button
18
Sharp
button
Key lock
button can lock the main unit so
that no calls or settings can be made. To
turn key lock on, press this button for about
3 seconds until a single beep is heard.
“
” is displayed.
To turn key lock off, press this button for
about 3 seconds.
19
Stop
button
KX-PW608DL_DW_QG.indb 2
2008/12/18 13:22:58
