15
Operating the built-in answering device
2
When receiving a call, a greeting message will be
played and the unit will record a voice message.
●
To record your own greeting message, see page 14.
light on/flash
Activating the answering device
1
Turn the
light on by pressing
.
Listening to recorded messages
When new messages are recorded, the
light will
flash.
Press
to listen to recorded messages.
After the messages are played back, the following will be
displayed.
■
To erase the messages, push
.
■
To save the messages, push
.
Listening to all of the recorded
messages
Press .
After the messages are played back, the following will be
displayed.
■
To erase the messages, push
.
■
To save the messages, push
.
ｻ ｲ ｾ ｲ ｼ ﾀ
ｻ
ﾖ ｳ ｹ ﾝ ﾉ
ｼ ｮ ｳ ｷ ｮ ﾊ [ ERASE] ｵ ｽ
ｻ ｲ ｾ ｲ ｼ ﾀ
ｻ
ﾖ ｳ ｹ ﾝ ﾉ
ｼ ｮ ｳ ｷ ｮ ﾊ [ ERASE] ｵ ｽ
Erasing a specific message
Press
twice while listening to the message you want
to erase.
Erasing all of the recorded messages
1
Press .
2
Press .
ｽ ﾍ ﾞ ﾃ
ｾ
ｼ ｮ ｳ ｷ ｮ ｼ ﾏ ｽ ｶ ?
ｻ ｻ ｻ ｻ ｻ ｻ
[ ERASE] ｵ ｽ
Operating the answering device
from a remote location
Preparation: Programming the remote operation ID
1.
Press .
2.
Press .
3.
Enter any 4-digit number (remote operation ID) except
or #.
4.
Press .
5.
Press .
Operation: Listening to a recorded message from a
remote location
Turn the
light on before you go out.
Remote operations are available only from a touch tone
telephone.
1.
Call your unit.
2.
Enter the remote operation ID during the greeting
message.
3.
Press
or wait 4 seconds.
●
Only the new recorded messages will be played
back.
●
To listen to all the recorded messages, press
after the new messages have been played back.
4
2
ｱ ﾝ ｼ ｮ ｳ
ｱ
No. = 1234
ｱ ｱ ｱ ｱ
[ 4 ｹ ﾀ , SET] ｵ ｽ
1
Example :
light on
