Panasonic KX-PRW120, Руководство по эксплуатации

Страница: 36 / 64

Answering system
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting
“
Greeting only
” as the recording
time setting (page 41).
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
Memory capacity (including your
greeting message)
The total recording capacity is about 38
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory becomes full:
–
“
Messages full
” is shown on the
handset display.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Turning the answering
system on/off
The answering system is preset to on.
1
To turn on:
M Menu N (right soft key) #327
To turn off:
M Menu N (right soft key) #328
2
M OFF N
Note:
R When the answering system is turned on,
is displayed.
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Recording your greeting message
1
M Menu N (right soft key) #302
2
MbN : “
Yes
” a M Select N
3
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
Press M Stop N to stop recording. a M OFF N
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 41)
is set to “
Greeting only
” , callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1
M Menu N (right soft key) #304
2
M Yes N a M OFF N
36
For assistance, please visit http://www.panasonic.com/help
Answering System
PRW120(en)_1016_ver041.pdf 36 2013/10/16 10:40:18